BVXJL - EPSON ACTION LASER II

Product Identification

Product ID:EPSON ACTION LASER II
MSDS Date:06/15/1993
FSC:6850
NIIN:00N054013
MSDS Number: BVXJL

Responsible Party
ASPEN IMAGING INTERNATIONAL INC
555 ASPEN RIDGE DR
LAFAYETTE, CO 80016-9300
US

Emergency Phone: 303-666-5750;800-955-5555

Info Phone: 303-666-5750;800-955-5555

Cage: 65521

Contractor
ASPEN IMAGING INTL INC
LAFAYETTE, CO 80027-5000 US

Telephone: 800-955-5555

Cage: 65521

Ingredients

STYRENE ACRYLATE COPOLYMER,

CAS: 25153-46-2

OSHA PEL N/K

ACGIH TLV: N/K


IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3FUME,B2


PROPENE POLYMERS; (POLYPROPYLENE)

CAS: 9003-07-0

RTECS: TR5000000

OSHA PEL N/K

ACGIH TLV: N/K


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


DYE; (METAL COMPLEX DYE)

CAS: 31714-55-3

OSHA PEL N/K

ACGIH TLV: N/K


AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:EXPOS UNDER NON-DUSTY
CNDTNS SHOULD NOT CAUSE ANY SIGNIFICANT HLTH EFT. UNDER DUSTY
CNDTNS, IRRIT MAY OCCUR W/SOME ACCUM OF TONER DUST IN NOSE &
THROAT. SKIN:PROD SHOULD NOT BE SIGNIFICANT HAZ FROM DERMAL EXPOS.
EYE:TONER DUST MAY CAUSE CONJUNC IRRIT BUT NO CHEM IRRIT/DMG TO
EYE/ITS PARTS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:INGEST:ACCIDENTAL INGEST OF TONER MAY
CAUSE NAUS. CHRONIC:RPTD EXPOS UNDER NON-DUSTY CNDTNS SHOULD NOT
CAUSE SIGNIFICANT HLTH HAZ. RPTD INHAL OF HIGH CONC OF TONERS HAS
CAUSED LUNG EFTS & DMG IN LAB ANIMALS. BASED ON THESE STUDIES,
EXCESSIVELY DUSTY CONDITIONS SHOULD BE AVOIDED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/LG AMOUNTS OF WATER FOR @ LEAST 15 MINUTES, OCCASIONALLY LIFTING
U PPER & LOWER EYELIDS. IF EYE IRRITATIONDEVELOPS, SEEK MEDICAL
ATTENTION. SKIN:NOT A SKIN IRRITANT. WASH WITH SOAP & WATER TO
REMOVE.

Fire Fighting

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . AVOID INHAL OF SMOKE. COOL FIRE EXPOSED CONTAINERS WITH
WATER SPRAY.
Unusual Fire/Explosion Hazard:AS W/ALL COMBUST MATLS IN FINELY DIVIDED
STATE, EXTREMELY HIGH CONC IN AIR MAY CREATE EXPLOSIVE MIXTURE.
ELIMINATE SOURCES OF IGNITION.

Accidental Release

Spill Release Procedures:LOOSE TONER MAY BE VACUUMED OR SWEPT. RESIDUE
MAY BE REMOVED WITH SOAP & WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID REPEATED/PROLONGED INHAL OF
EXCESSIVE DUST. DO NOT TAKE INTERNALLY. AVOID CONT W/SKIN, EYES, &
CLTHG. STORE IN COOL, DRY, WELL-VENTILATED AREA.
Other Precautions:DO NOT INCINERATE.

Exposure Controls

Respiratory Protection:NONE REQD WHEN USED AS INTENDED IN PRINTER
EQUIPMENT. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE REQUIRED.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:FOR USE OTHER THAN NORMAL OFFICE PRINTER,
OPERATING PROCEDURES (SUCH AS IN BULK TONER PROCESSING FACILITY)
EYE (SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROT EQUIP:PROTECTION & RESPIRATORS MAY BE REQD IF UNDER DUSTY
CONDITIONS.

Chemical Properties

HCC:N1
Spec Gravity:1.3-1.5
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:ABNORMALLY HIGH AIRBORNE CONCENTRATIONS OF
DUST CAN PRESENT POSSIBILITY OF EXPLOSION IF IGNIT SOURCE IS
PRESENT.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE.

Disposal

Waste Disposal Methods:REMOVE TO AN APPROVED LANDFILL SITE & DISPOSE OF
IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.